ABOUT ME

-

Today
-
Yesterday
-
Total
-
  • Resin And Hardener Araldite
    카테고리 없음 2020. 10. 24. 03:16


    Araldite SW 404 blue, medium-viscosity liquid 55,000 - 80,000 1.8 5 - 1.9 Hardener HY 2404 yellow, transparent, low-viscosity liquid 3,500 - 5,500 1.0 - 1.0 Processing Mix ratio Araldite SW 404 Hardener HY 2404 Parts by weight 100 10 Resin / Hardener mix at 20 - 25 °C Viscosity Pot life (500 g batch) Gel time, thin layer Demouldable after min. Araldite joints are water proof, heat proof, stress proof, and resistant to most chemicals. Non-corrosive and non-toxic. Package Contains Araldite AW 106 Standard Epoxy Adhesive ( Resin 1kg + Hardener 800g ) 1.8kg x 1 Piece This pack contains two tubes: Features: Worlds Strongest Bond Versatile No Shrinking after curing Prevents sagging Uses: ARALDITE Standard bonds anything to anything like. Araldite MY 720/Hardener HY 906 Formulation Ratio: Araldite MY 720-100 pbw (parts by weight) Hardener HY 906-100. pbw. When adding an accelerator (DY 062), the hardener ratio (HY 906) can be reduced to 100 pbw. Procedure: Heat the resin to about 70°C (158°F), add the hardener. ARALDITE® RAPID G RESIN Version 1.1 Revision Date: SDS Number: 15 Date of last issue: Date of first issue: SDSGB-AM – – 15 1 / 20 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier. Araldite is the classic consumer grade epoxy resin - it's well known to everyone and been on the market for donkeys years. In my youth it came in two metal tubes, stored in a cardboard box. Mixing it involved guessing equal quantities of resin and hardener catalyst, and oftentimes making a bit of a mess.

    1. Araldite Resin And Hardener Ratio
    2. Araldite Resin And Hardener Instructions

    Araldite is a registered trademark of Huntsman Advanced Materials (previously part of Ciba-Geigy) referring to their range of engineering and structural epoxy, acrylic, and polyurethaneadhesives. The name was first used in 1946 for a two-part epoxy adhesive.

    Araldite adhesive sets by the interaction of a resin with a hardener. Heat is not necessary although warming will reduce the curing time and improve the strength of the bond. After curing, the joint is claimed to be impervious to boiling water and all common organic solvents. It is available in many different types of pack, the most common containing two different tubes, one each for the resin and the hardener. Other variations include double syringe-type packages which automatically measure equal parts. This type of dispensing is not exact, however, and also poses the problem of unintentional mixing of resin and hardener. Good

    History[edit]

    Aero Research Limited (ARL), founded in the UK in 1934, developed a new synthetic-resin adhesive for bonding metals, glass, porcelain, china and other materials. The name 'Araldite' recalls the ARL brand: ARaLdite.

    De Trey Frères SA of Switzerland carried out the first production of epoxy resins. They licensed the process to Ciba AG in the early 1940s and Ciba first demonstrated a product under the tradename 'Araldite' at the Swiss Industries Fair in 1945. Ciba went on to become[when?] one of the three major epoxy-resin producers worldwide. Ciba's epoxy business was spun off and later sold in the late 1990s and became the advanced materials business unit of Huntsman Corporation of the US.[1]

    Notable applications[edit]

    • Beginning in 1940, Araldite was used in the production of the De Havilland Mosquito aircraft.
    • Araldite adhesive is used to join together the two sections of carbon composite which make up the monocoque of the Lamborghini Aventador.
    • The use of Araldite adhesive in architecture to bond thin joints of pre-cast concrete units was pioneered by Ove Arup in Coventry cathedral and the Sydney Opera House.[2] At Coventry cathedral, Araldite adhesive was used to bond its columns and fins, while at Sydney Opera House, Araldite adhesive was used to bond the rib sections of the shells, since a traditional concrete joint would have slowed construction, as it would need 24 hours to cure before stressing.[3]
    • Highmark Manufacturing uses Araldite epoxy resin in the manufacture of advanced ballistic protection body armour.[4]
    • Schlösser Metallbau, a manufacturer of metal parts for railway carriages, uses Araldite epoxy resin to bond aluminium profiles of cab doorframes on the BR 423 Siemens Bombardier tram.[5]
    • Fischer Composite Technology GmbH uses the Araldite RTM System to produce carbon composite side blades for the Audi R8.[6]
    • Araldite epoxy resin is commonly used as an embedding medium for electron microscopy.[7]
    • Some Flamenco guitarists (e.g. Paco Peña) use it to reinforce their fingernails.[8]
    • Brian May used it to seal the pickups in his homemade Red Special guitar to prevent microphonic feedback.[9]

    Araldite Resin And Hardener Ratio

    Advertising[edit]

    Resin And Hardener Araldite

    In 1983, British advertising agency FCO Univas set up a visual stunt presentation of the strength of Araldite adhesive by gluing a yellow Ford Cortina to a billboard on Cromwell Road, London, with the tagline 'It also sticks handles to teapots'.[10] Later, to demonstrate more of its strength, a red Cortina was placed on top of the yellow Cortina, with the tagline 'The tension mounts'. Finally, the car was removed from the billboard, leaving a hole on the billboard and a tagline 'How did we pull it off?'.

    See also[edit]

    Araldite Resin And Hardener Instructions

    References[edit]

    1. ^Seymour, Raymond B. (April 1981). 'History of the Development and Growth of Thermosetting Polymers'. Journal of Macromolecular Science, Part A. 15 (6): 1165–1171. doi:10.1080/00222338108066459.
    2. ^Jones, Peter (2006). Ove Arup. Yale University Press. pp. 215, 248. ISBN0-300-11296-3.
    3. ^Murray, Peter (2004). The Saga of Sydney Opera House. Taylor & Francis. p. 54. ISBN0-415-32521-8.
    4. ^'Armour uses Araldite'. The Engineer Online. 15 January 2000. Archived from the original on 12 September 2012.
    5. ^'Araldite Adhesive of Choice'. EPPM Magazine. 5 (3). April 2003. Archived from the original on 2008-01-13.
    6. ^'In Style'. Adhesives & Sealants Industry. 1 February 2008. Retrieved 2015-06-30.
    7. ^Hayat, M. A. (2000). Principles and Techniques of Electron Microscopy: Biological Applications. Cambridge University Press. p. 98. ISBN0-521-63287-0.
    8. ^'Paco Peña, Desert Island Discs - BBC Radio 4'. BBC.
    9. ^'Experts 2007'. BBC.
    10. ^Images of original adverts
    Resin

    External links[edit]

    Retrieved from 'https://en.wikipedia.org/w/index.php?title=Araldite&oldid=965828184'




Designed by Tistory.